Contact Us
CHINA
ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China
TEL: +86-312-2090169/2090165
FAX: +86-312-2090165
Email: sales02@metowd.com
IRAN
ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran
Postal Code: 1834175977
Tel: 00982156231607-8
Mob: 00989121350509
Email: atiravesh@yahoo.com
Germany Design & Development Office
Germany Design & Development Office
ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany
Tel: 0049 521 9890 170
Mob: 0049 163 5149 622
-
23/Feb
2023
Common Problem during high frequency induction welding
High Frequency Induction Welding Machines (HFIWM) are widely used in various industries due to their fast, efficient and economical welding process. However, users may encounter so
-
21/Feb
2023
Inverter Welding Machine
Our Inverter welding machine has following characteristic: 1. Because the current is highly concentrated in the welding area and the heating speed is extremely fast, the welding sp
-
18/Feb
2023
Cold Saw Blade
There are two types of cold saw blade: HSS and TCT serrated alloy saw blades The main materials of high-speed hacksaw blades are M2 and M35. The general sawing speed of the saw bla
-
02/Feb
2023
Precautions for medium frequency furnace heating
1. Before the medium frequency furnace is opened, it is necessary to carefully check the electrical equipment, water cooling system, inductor copper tube and other components to en
-
01/Feb
2023
Heating principle of medium frequency furnace
The heating principle of medium-frequency furnace is based on the basic concept of electromagnetic induction phenomenon. The three-phase DC AC power supply is converted into DC pow
-
14/Jan
2023
Common problems in HF Welding-4
High frequency welding machine striking High frequency welding machine striking is very common in high frequency welding, which seriously affects the quality of high frequency weld
-
13/Jan
2023
Common problems in HF Welding-3
Steel pipe indentation and pit There are two types of indentation. One is linear indentation, which is caused by improper adjustment of roll position; The other is crescent-shaped
-
07/Jan
2023
Common problems in HF Welding-2
Influence of strip edge shape on welding quality: Shape and adjustment of staggered edges Misalignment of plate edges (also known as lap welding) is an important reason for affecti
-
09/Nov
2022
Common problems in HF Welding-1
High frequency welded pipe unit is the core equipment of the entire HFW production line, and also the equipment with the highest technical requirements of the production line. If i
-
03/Nov
2022
Several problems should be paid attention to in the production process.
Several problems should be paid attention to in the production process. a) When installing the impedance, the front end shall not be too far beyond the center line of the extrusion
-
17/Oct
2022
Analysis method of induction coil with load
In order to better understand the actual working process of steel wire in the induction coil, it is necessary to analyze the induction coil with steel wire. The parameters to be an
-
08/Oct
2022
Design and Process Requirements of Load Coil for Induction Heating
Induction heating is applied to the heat treatment production of a variety of products [1], such as steel wire, wire rod, pipe, square steel ingot, gear, etc. with regular shape. I