Induction heating is applied to the heat treatment production of a variety of products [1], such as steel wire, wire rod, pipe, square steel ingot, gear, etc. with regular shape. In addition, there are various types of crankshafts, connecting rods and local area heating of workpieces with irregular and asymmetric structures. In addition, the materials of the heated workpiece are also various, such as ordinary carbon steel, stainless steel, austenitic stainless steel, aluminum, copper, other alloys and non-ferrous metals. The products of induction heating equipment are widely used, and their output coils have a variety of styles. The shape of the heated product workpiece, the limitation of the heated area, the material characteristics of the heated workpiece, and the requirements of the heating process determine the style and performance requirements of the designed coil.
As far as the coil design style is concerned, the induction heating coil style is generally divided into two categories: single-layer wound straight through coil with regular shape and special-shaped coil. The coil with regular shape is usually wound in a symmetrical structure. This type of coil is relatively common and is suitable for the production of most induction heating products, such as bars, wire rods and pipes. Later, the coil loaded with steel wire will be taken as an example for analysis. The special-shaped coil is usually a coil specially designed according to the workpiece style. Its application is relatively complex. Usually, after the preliminary design, the desired heating effect can be achieved through continuous debugging and practical adjustment in the later stage, such as the heating coil of the connecting rod crankshaft of the special-shaped structure.
After the coil design meets the style requirements, it also needs to meet the process requirements, including the process requirements for heating products and the production process requirements for the coil itself. These requirements need to be considered when designing the coil:
(1) The coil design meets the frequency requirements of the induction heating power supply, which is reflected in the coil design that there should be an appropriate inductance to match the power supply.
(2) The designed coil meets the requirements of heating product temperature, which is reflected in the coil design that the appropriate coil length should be selected in combination with the workpiece temperature requirements.
(3) Safety requirements of the coil itself, including insulation performance, coil efficiency, cooling requirements, etc. The induction coil is directly related to the characteristics of the corresponding configured power supply and the working principle of the power supply. Different manufacturers have different power supplies, which are not described in detail here. For the coil manufacturing process, it is usually necessary to consider the selection of hollow copper tube materials for coil winding, requirements for cooling water, etc., to ensure the operation of the coil under steady state





