+86-18630226696

Contact Us

    China

    CHINA

    ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China

    TEL: +86-312-2090169/2090165

    FAX: +86-312-2090165

    Email: sales02@metowd.com

    Iran

    IRAN

    ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran

    Postal Code: 1834175977

    Tel: 00982156231607-8

    Mob: 00989121350509

    Email: atiravesh@yahoo.com

    Anahita-GmbH

    Germany Design & Development Office

    Germany Design & Development Office

    ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany

    Tel: 0049 521 9890 170

    Mob: 0049 163 5149 622

    Email: amir.malek@anahita-gmbh.de
    s.malek@anahita-gmbh.de

Common Problem during high frequency induction welding

Feb 23, 2023

High Frequency Induction Welding Machines (HFIWM) are widely used in various industries due to their fast, efficient and economical welding process. However, users may encounter some common problems during the welding process.

One of the most common problems seen with High Frequency Induction Welding Machines is poor welds. If the machine settings or electrode positioning are incorrect, the weld will be of poor quality and may be unreliable when subjected to load or extreme temperatures. To resolve this issue, make sure the settings are correct and check the electrode condition to ensure they are properly positioned.

Another issue is weld porosity. This happens when the molten metal fails to fill the joint entirely and leaves tiny air pockets in the weld. To resolve this issue, make sure the machine settings are correct and that the weld is clean. If the weld is contaminated, it may cause porosity.

A final issue is high weld distortion. This occurs when the weld joint is subjected to excessive heat and the metal warps out of shape. To avoid this problem, ensure that the settings are correct and the welding current is regulated correctly.

In conclusion,High Frequency Induction Welding Machines are powerful tools that can get the job done quickly and efficiently. However, users should be aware of some common issues and employ methods to prevent them from occurring. By following this advice and troubleshooting any issues, the welding process can be successful.

 

Send Inquiry