+86-18630226696

Contact Us

    China

    CHINA

    ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China

    TEL: +86-312-2090169/2090165

    FAX: +86-312-2090165

    Email: sales02@metowd.com

    Iran

    IRAN

    ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran

    Postal Code: 1834175977

    Tel: 00982156231607-8

    Mob: 00989121350509

    Email: atiravesh@yahoo.com

    Anahita-GmbH

    Germany Design & Development Office

    Germany Design & Development Office

    ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany

    Tel: 0049 521 9890 170

    Mob: 0049 163 5149 622

    Email: amir.malek@anahita-gmbh.de
    s.malek@anahita-gmbh.de

The second of the series elements of adjusting welding process parameters in high frequency welding

May 13, 2021

The second of the series elements of adjusting welding process parameters in high frequency welding: welded pipe material characteristics

 

What factors need to be considered in the welding process are the characteristics of welded pipe materials, which are mainly concerned about the characteristics of the materials. They can be divided into two categories, as shown in the following analysis:

 1. Mechanical property parameters of materials, mechanical property parameters of base metal, such as material hardness, strength, elastic modulus, etc. These performance parameters have different adjustment requirements for the design of extrusion roller passes, roller material requirements, forming requirements, edge matching requirements into the center of extrusion roller, and materials with different extrusion force. Welding adjustment personnel need to make different adjustments according to the material characteristics.

 2. Electrical, magnetic and thermal characteristic parameters of the material electrical characteristic parameters of the base metal need to be concerned about: material resistivity, permeability, thermal diffusion coefficient and material melting point. According to the melting point and resistivity of materials, it can be roughly determined that different materials have requirements on the resonant current of high-frequency power supply. The current of induction welding is eddy current with skin effect. The generation of eddy current is closely related to the permeability of materials. 

The permeability of different materials determines that the appropriate frequency of high-frequency power supply should be selected to match it, To achieve the best welding current demand.


Send Inquiry