Contact Us
CHINA
ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China
TEL: +86-312-2090169/2090165
FAX: +86-312-2090165
Email: sales02@metowd.com
IRAN
ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran
Postal Code: 1834175977
Tel: 00982156231607-8
Mob: 00989121350509
Email: atiravesh@yahoo.com
Germany Design & Development Office
Germany Design & Development Office
ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany
Tel: 0049 521 9890 170
Mob: 0049 163 5149 622
Seam Induction Welding Machine
Product Name: ERW Welding Machine The ERW Welding Machine (all-in-one machine) is designed for straight seam induction (contact) welding of steel tubes. It mainly uses IRFP460 (MOSFET) and DSEI60-06A (fast recovery diode), rectifier diodes, and modular Power component consisting of high-power...
Description
Seam Induction Welding Machine

1.description
Product Name: Seam Induction welding machine.The Seam Induction welding machine (all-in-one machine) is designed for straight seam induction (contact) welding of steel tubes. It mainly uses IRFP460 (MOSFET) and DSEI60-06A (fast recovery diode), rectifier diodes, and modular Power component consisting of high-power IGBT and other power devices. The high-power capacitor bank C and the inductance coil L form the current-mode parallel boost resonant circuit. This kind of circuit adapts to the high-frequency welded pipe with low load impedance and does not require the output transformer. This not only improves the efficiency but also increases the reliability of the whole machine.
Apply range: 60kW~1200kW induction heating power supply
2.partly introduction about seam induction welder
Central Console
The console achieves remote control and power regulation of solid-state H.F. welder, installed with LCD; also it has indicators of armature voltage, field voltage on DC speed regulation cabinet and indicators of DC voltage, DC current on welder. Installation of power-speed closed loop control function is optional. The console has design difference according to different types and quantities of matching DC speed regulation cabinet.
Mechanical Adjusting Equipment
●3-D mechanical adjusting equipment: For induction/contact welding mode, applied with installation and adjustment of inverter output cabinet, the inductor position can be adjusted by electric or manual.
Water Cooling System:

water cooling system
water cooling system adopts closed cooling tower structure. Cooling soft water flow in sealed water tank and cooling pipes. The inner circulation soft water is cooled by overhead fan and water-spray method using the principle of absorbing heat when evaporation. The spray water store at the bottom of cooling tower, soft water circulate inside the closed cooling tower's heat dissipation pipe, spray-water spray at pipes' surface by spray-water distribution system and sprayer through spray system, some heat is taken by dissipation and soft water temperature inside the pipe go down accordingly. The cut board stops water in hot air and undissipated water, make them flow through PVC heat exchange layer, the water in the layer is cooled by air, then temperature goes down and fall down to the bottom of the tower.
Seam Induction welding machine has following advantages:
High Efficiency
Less Area Covered
Easy installation
Welding Quality

High Efficiency
Comparing to traditional solid state welder, save power for 15%-25%.

Less Area Covered
Saving 60% area than traditional solid state welder.

Easy installation
Comparing to the 5-7 days for traditional solid state welder installation, high efficiency switch welder installation is 1 day.
Less installation cost

Welding Quality
Benefitted from PWM precise control voltage and three level of filtering, the voltage output is stable, ripple coefficient is 50% lower than solid state welder. The welding quality is obviously better than traditional solid state welder.
4.Company profile
ZSHC company is a global supplier with manufacturing, service, and research centers to support its broad customer base. ZSHC is built on the quality of our engineering and the strength of our service. As a global induction heating and welding manufacturer specializing in tube and pipe welders, ZSHC provides the widest range of High Frequency Welders available. All of our welders are based on the High Frequency or "HF" welding process. our welding equipment range gives you the capability to successfully weld almost any metal you want – efficiently and economically.

You will be very welcomed if you come to our exhibition.And the after-sales service are shown below:
1. Field Commissioning
2. One Year Warranty Period
3. Field Maintance
4.Sufficient spare parts inventory
5. 7 x 24 hours full response service.
6. life-long paid service, and spare parts
7. On line Technical Service




Welcome friends and customers all of the world come to visit us.
Address: ChaoYangNan Str,300m to Baocang Express Way Exit,Baoding,Hebei,China
Contact person: Mrs. Lulu
Email:lulu@sailfishautomation.com
Whatsapp: +86-18630226696
Hot Tags: seam induction welding machine, China, manufacturers, suppliers, factory, customized, wholesale, buy, made in China, welding machine for microprocessor control technology, welding machine for thick wire welding, 100KW High Efficiency Switch Welder, welding machine for magnetic control technology, welding machine for factory use, welding machine for thin plates and tube
You Might Also Like

















