(1) The amount of heat can be reduced to a minimum, the thermal impact Kingsiang the range of changes is small, and the deformation due to heat conduction is also the lowest.
(2) 32mm plate thick single-channel welding welding process parameters have been verified, can reduce the time required for thick plate welding can even save the use of filler metal. (3) There is no need to use electrodes, no electrode contamination or damage concerns.
And because it does not belong to the contact welding process, the wear and tear of the machine can be reduced to a minimum.
(4) The laser beam is easy to focus, alignment and guided by optical instruments, can be placed at an appropriate distance from the workpiece, and can be re-guided between the tools or obstacles around the workpiece, other welding rules due to the above space constraints can not be played.
(5) The workpiece can be placed in a closed space (by vacuum or internal gas environment under control).
(6) The laser beam can be focused in a very small area and can be welded to small parts with similar intervals.
(7) The type of weldable material range is large, can also be joined to each other heterogeneous materials.
(8) Easy to automate high-speed welding, can also be digital or computer control.
(9) Welding thin material or fine diameter wire, will not be like arc welding as easy to have the trouble of remelting.
(10) Not affected by magnetic field (arc welding and electron beam soldering is easy), can accurately align welding parts.
(11) Two metals of different physical nature (such as different resistors) can be welded.
(12) No vacuum is required and no X-ray protection is required.
(13) If perforated welding, the weld depth of a width ratio of up to 10:1. (14) The device can be switched to transfer the laser beam to multiple workstations.





