Contact Us
CHINA
ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China
TEL: +86-312-2090169/2090165
FAX: +86-312-2090165
Email: sales02@metowd.com
IRAN
ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran
Postal Code: 1834175977
Tel: 00982156231607-8
Mob: 00989121350509
Email: atiravesh@yahoo.com
Germany Design & Development Office
Germany Design & Development Office
ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany
Tel: 0049 521 9890 170
Mob: 0049 163 5149 622

Pneumatic Shearing and Welding
Applicable for the online seam annealing of ∮114-∮610 straight seam steel pipe.
Description
Metal Strip Material Automatic Shear Welder
Applicable for the online seam annealing of ∮114-∮610 straight seam steel pipe.
Production Description
Application:
It can be used for steel welding pipe production, continuous stamping production and other production. It can be finished the welding work of strip material (including stainless steel, carbon steel, galvanized strip, copper, aluminum)
ADVANTAGE:
1. Adopt advanced shear process without burr.
2. It is easy to work for pneumatic pressure as power.
3. Clamping plank and keeping the level, all these controlled by foot switch
4. Use tungsten TIG welding; The welding seam is small without polishing. And it is high strength.
5. Automatic for welding.
FEATURES:
1. Adopt oblique shear; Two down knives should be fixed on the down knife base. The base connected the frame by screws. The up knife should be installed on the moved frame. There is oil tank to move for up knife support frame.
2. Tighten; The position should be on the frame. Make two strips to keep the level and press; Tighten the position to make right and left parts;
3. To butt joint of right and left two pieces of strip, clamping the middle of copper electrode plates by clamping device; The welding torch should be fixed on the moved slider
4. The screw shaft drive by motor; The motor can be adjusted speed by the inverter output frequency, then adjust the speed of welding torch.
5. The indicator is light for right and left, it shows pressing tightly. on the contrary, it sends the materials.
6. Motorized button: there are front and back buttons; it can be adjusted the welding torch position by hand. Position by the indicator.
Hot Tags: pneumatic shearing and welding, China, manufacturers, suppliers, factory, customized, wholesale, buy, made in China, Butt And Welding Machine, Hydraulic Shearing Butt And Welding Machine, Steel Strip Butt Welder, hydraulic shearing and welding machine, Shear And Weld Machine, Shearing And Butt Welding Machine
You Might Also Like









