How can the straightness of the product be controlled, besides Previous reason introduced, we also need to consider and deal with the following key elements:
1. Heating requirements of induction heating
At present, the heat treatment of online bars and tubes uses rapid induction heating. In the process of induction heating, the material will release the internal stress of the material. This requires that the heating must ensure the permeability of the heating to the material, and the surface temperature is increased. It should not be too fast, especially for rods. Ultimately, we must try our best to reduce the temperature difference between the core and the surface of the material. Generally, it is required to be less than 50 degrees, and it is best to be less than 20 degrees.
2. Requirements for quenching and cooling
Quenching cooling is a very important link for linearity control. Both bars and pipes need to continuously obtain the required metallographic structure during the quenching process that meets the requirements of the process material without bending. This usually needs to ensure the quenching medium system for cooling to ensure that the quenching liquid has a certain outlet pressure, flow rate, post-exit guidance, continuity, 360-degree uniformity and stability of the outside of the tube and rod, and no second-hand liquid (hydrothermal) produced by the reflux of the hot liquid. These elements are very important for quenching. And choose different nozzle forms according to the size of the tube rod, hole, nozzle or slit, which needs to be selected according to the product. As a whole, it must be ensured that sufficient cooling needs to be achieved under uniform conditions, so that linearity can be ensured.
3. Production line speed requirements
The speed of the production line is a relatively tangled parameter. No matter what product, especially for online continuous QT equipment, the process data of its production speed cannot be infinitely high. The speed must match the induction heating process and quenching cooling process. , These treatments need to be combined with actual product quality requirements in addition to theoretical calculations. In short, comprehensive consideration is required.





