We know that induction welding is not in contact with the material to be welded, using high-frequency electromagnetic induction to heat the welding area to the molten state of the material, and then forming qualified welds by extrusion to meet the quality requirements of welding.
The traditional way of induction welding is to pass the welded pipe directly through the induction coil made of copper tube or copper plate, heat the edge of steel strip in the welding area before the extrusion roll through skin effect and proximity effect, and form the weld after extrusion by the extrusion roll. So this kind of model and welding process is almost all the high frequency induction welding method, which is applied to all kinds of pipes. Is this the only way of high frequency induction welding? Of course not.
We know, what is the role of induction coil in high frequency induction welding process? The function of induction coil is only to provide heat energy for a certain length of V-shaped area in front of the extrusion roll. Heating the V-shaped area to the forging temperature only needs heating the V-shaped area to the temperature required for forming weld after extrusion forging. Then the non perforated coil inductor can also realize the skin effect and proximity effect heating on the V-shaped area, because the skin effect is the characteristic of induction heating, and the proximity effect is determined by the electromagnetic effect of different phase current confluence and attraction at the edge of the steel strip. Therefore, the non perforated coil inductor can also realize the heating requirements of high frequency induction welding, but it is controlled by the electromagnetic effect For non perforated coil inductor, the application efficiency of magnetic line of force is a challenging topic. Its induction efficiency is not as high as that of traditional induction welding coil. Generally, it needs to be equipped with magnet to improve the heating efficiency (similar to silicon steel sheet for medium frequency weld annealing inductor). Although the defects of this kind of induction welding method are very obvious, and the coil efficiency is not high, when the welding thickness is very thin (less than 1 mm) in the pipe product field, and the product has special material characteristics requirements, it should have its special use effect in the special product field, and the traditional induction heating sometimes can not meet the requirements of some products.





