We conduct a brief analysis of the requirements for production capacity, product quality and equipment quality mentioned pervious, and make a brief analysis of the attention points in process and equipment design:
1. At present, in response to the requirements for production capacity, in terms of increasing production capacity, the main key point of equipment improvement lies in the previous process of stainless steel pipes entering the bright annealing equipment-welding, the base material of bright austenitic stainless steel pipes It is an austenitic stainless steel strip. The stainless steel pipe is a seam welded pipe welded online by the stainless steel strip. Because it is a bright stainless steel pipe, the surface weld of the steel pipe has higher requirements. At present, the mature and reliable method is argon arc welding or laser When welding, with shielding gas, the heat affected zone of the weld is as small as possible, and the surface oxidation is as small as possible. The welding speed of the welding machine of this kind of welding process is very limited, so the main limitation of the production capacity lies in this.
2. In terms of equipment quality, the main concern for stainless steel bright annealing line equipment is the degree of automation and equipment safety. In terms of automation, current equipment can be realized. For example, PLC, HMI, and instrumentation are all very mature equipment components. As long as the equipment is equipped with a process detection device, the data of each link of the equipment can be visualized, operable, and integrated. Fault detection and display, fault reminding and troubleshooting, etc. can all be easily realized. Because the stainless steel bright annealing line equipment protects the gas control part, and the involved gas is hydrogen, nitrogen, argon, etc. according to the process requirements, safety is an indispensable consideration. The pressure, flow rate, safety valve body, safety discharge, ignition device design, etc. of the gas circuit are indispensable. As long as the design is reasonable, safety can be completely guaranteed.
3. The focus of product quality manufacturers' concerns, the effective quality control of products mainly involves many elements. Mainly include these aspects:
a. The surface state and straightness of the steel pipe before the steel pipe enters the on-line atmosphere heating.
b. The steel pipe enters the atmosphere sealed state at the entrance of the induction heating wall.
c. According to the selection of material heating process temperature and temperature stability control.
d. The holding time of the heating zone after reaching the process temperature.
e. The cooling effect of the cooling section after heat preservation.
f. After cooling, the atmosphere at the outlet of the cooling cavity is sealed.
g. The gas ratio characteristic of the atmosphere during the whole process from the steel pipe into the heating cavity to the outlet of the cooling cavity.
How to ensure the process requirements of the above 7 aspects will be the most important thing in ensuring product quality. In the actual production line design process, in order to ensure the process parameter requirements of the above items, we need to consider many equipment requirements, such as the selection of sealing materials, the design of induction coils and tightness, product material characteristics, process temperature selection, and insulation cavity design , Cooling water flow design, heat conduction material design, air circuit control design, etc., are all important conditions for effectively ensuring product quality without problems.





