Contact Us
CHINA
ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China
TEL: +86-312-2090169/2090165
FAX: +86-312-2090165
Email: sales02@metowd.com
IRAN
ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran
Postal Code: 1834175977
Tel: 00982156231607-8
Mob: 00989121350509
Email: atiravesh@yahoo.com
Germany Design & Development Office
Germany Design & Development Office
ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany
Tel: 0049 521 9890 170
Mob: 0049 163 5149 622

Adjustage Equipment
Generally there are two rows of straightening rollers, the number of which varies. There are also two-roll straighteners, which straighten materials with different diameters depending on the angle change of two rollers (concave in the middle, hyperbolic rolls). The main types are pressure...
Description
Generally there are two rows of straightening rollers, the number of which varies. There are also two-roll straighteners, which straighten materials with different diameters depending on the angle change of two rollers (concave in the middle, hyperbolic rolls). The main types are pressure straightener, balance roll straightener, shoe roll straightener, rotary reverse bending straightener and so on.
Adjustment Methods:
In the roller straightener, there are many straightening schemes according to the deformation degree of each roller and the method of eliminating the residual curvature.
(1) Small deformation straightening
Small deformation straightening means that the reduction of each roll is just enough to straighten the maximum residual bending at the front adjacent rolls, so that the residual bending is gradually reduced. Because the maximum original curvature of the plate is difficult to be determined and measured in advance, the small deformation straightening scheme can only be partially implemented on some roller straighteners. The main advantage of this scheme is that the total deformation curvature of the plate is small, and the energy required for straightening is also small.
(2) Large deformation straightening
Large deformation straightening means that the first few rolls adopt much larger reduction than small deformation straightening, so that the sheet can be bent large enough to eliminate the non-uniformity of original curvature and form single curvature, and the later rolls adopt small deformation straightening. For the sheet with work hardening, the number of repeated bending should be increased or the value of reverse bending rate should be increased due to the large elastic recovery curvature of the hardened material.
Using large deformation straightening can get better straightening with fewer rolls. However, if the deformation degree of the plate is excessively increased, the internal stress will be increased, the product quality will be affected, and the energy consumption of the straightener will be increased.
Contact Us:
We offer 24hours online service, please contact us by sales02@metowd.com
Hot Tags: adjustage equipment, China, manufacturers, suppliers, factory, customized, wholesale, buy, made in China, Hydrostatic Testing Machine, Tube Straigtening Machine, High Precision Slitting Machine, Ultrasound Flaw Detector, , Flat Chamfering Machine
You Might Also Like










