The working environment of high frequency contact welding head is very bad, mainly as follows:
1) Water, emulsion, high temperature, heating, flue gas, corrosive gas or liquid, etc. can be seen by the naked eye in most environments;
2) It carries high-frequency AC current and voltage. The common current frequency is 200khz-800khz. The current varies from hundreds of amps to thousands of AMPS according to the power of the equipment;
3) During the production of the equipment, the contact works under a certain pressure, generally ranging from 2 ~ 4bar;
4) The equipment operates continuously on line, and the contact constantly bears the sliding friction of the welded material under the pressure;
5) As the environment where the contact is located is dirty, and the oxide generated during high-temperature friction of the contact is seriously heated, oxide impurities will form, and spark and arc will occur under the action of high current;
6) When the welded object below is uneven, the contact resistance at the contact will change greatly, and the contact will have different degrees of electric spark;
In addition to the above environmental conditions, the working environment of welding contacts will be severely challenged due to the operating contact pressing pressure of field operators, the resilience of welded materials, the hardness of welded materials, surface friction, etc.





