The working principle of an arc spraying machine mainly involves the following steps:
Power supply and conductive nozzle: Two continuously fed metal wires serve as consumable electrodes and are fed into the conductive nozzle of the arc spraying gun through a wire feeding device. The conductive nozzles are connected to the positive and negative poles of the power supply. twelve thousand three hundred and forty-five
Arc generation: When two metal wires come into contact at the ends, an arc is generated due to a short circuit, and the ends of the metal wires instantly melt.
Atomization and spraying: Using compressed air to atomize molten metal wires into micro droplets and spray them at high speed onto the surface of the workpiece, forming a coating. one million two hundred and thirty-four thousand five hundred and sixty-seven
Throughout the process, the arc serves as a heat source, not only heating the metal wires to melt them, but also generating sufficient high temperature and pressure to vaporize and ionize the metal, ultimately forming a strong coating on the surface of the workpiece.





