Solid-State Superaudio Smoothing reactor and Inversting section
Smoothing reactor
It is connected between the rectifier and inverter to play the role of flat wave, current limiting and blocking. Made of high-silicon silicon steel, it is characterized by small leakage flux and low noise. The coil uses high purity copper tubes, with multi-layer Insulation protection. So, the operation is stable and reliable.
Inversting section
The inversting section is composed of IGBT and diode module. The single-phase inverter bridge passes through it to control the IGBT trigger pulse so that the IGBT transistor turns alternately to convert the direct current into single-phase alternating current. By change of the trigger frequency, the frequency of the alternating current can be changed to obtain the required frequency. The IGBT drives power sources to be isolated from each other to prevent interference. The IGBT and fast recovery diode RCA use imported high-voltage capacitors, and are integrated into the circuit board, which are more stable and reliable.





