The material, shape, manufacture process of the induction coil can influence directly the welding efficiency of the steel tube.
The induction coil has the meticulous and precise manufacture process. Usually the induction coil is made in advance. Thus, they can elaborate the functions of every parts of the facility and improve the welding efficiency.
Solid state HF induction welder is different from the valve tape HF welder. The vacuum HF welder has output welding transformer. The induction coil is installed on the secondary side of the welding transformer. It is easy to match and not rigorous on the demand for induction coil. For there is one more grade on welding transformer coupling, the efficiency is obviously low.
The solid state HF welder, besides the working volt of the complete appliance is low, its channeling capacitance resonates directly with the induction coil welded on the steel tube. For there is no welding transformer, having one less grade coupling, the efficiency is obviously higer.
That would ask for the induction coil to be strict and standard in manufacture to match. By the reason that the electric pressure is low, the gap between the inside diameter of the induction coil and the outside diameter of the welded steel tube (VEE) may reduce properly to improve the welding efficiency.
The benefit from the strict and standard manufacture of the induction coil is far higher than the manufacture cost of the induction coil.
Skeleton map of induction coil A and induction coil B.






