Due to the working requirements of the contact welding contact and the environmental constraints of the welding head, the material of the butt contact welding head puts forward special characteristic requirements. As a contact welding head, the material must have the performance in line with the actual application in the following aspects:
1) Conductivity: since the contact bears relatively large current carrying requirements, the contact material shall have high conductivity to reduce the contact resistance, and low secondary emission and light emission to reduce the arc current and arc burning time, so the material must have high conductivity;
2) Heat conduction capacity: because the contact carries large current, its temperature is high, so it must have certain heat dissipation capacity and high heat conduction capacity, so that the heat generated by arc or Joule heat source can be transmitted to the contact base as soon as possible;
3) . strength, because the contact works under a certain pressure, the strength of the material also needs to be considered;
4) Wear resistance: since the contact is in constant friction with the surface of the welded object during operation, the contact material needs to have considerable wear resistance;
5) Hardness is also one of the characteristics to be considered. A small hardness can increase the contact area, reduce the contact resistance and reduce the contact heating and static fusion welding tendency during static contact under a certain contact pressure. Higher hardness can reduce the welding area and improve the mechanical wear resistance;





