Precautions for automatic high frequency welding machine operation
1. Please do not use the equipment when the input voltage is too high.
2. The inside of the machine and the sensing ring must be cooled with water, and the water source must be kept clean to avoid blocking the cooling pipes, causing overheating and damage to the machine.
3. The cooling water temperature should not be too high, and should be lower than 45 ℃.
4. Do not use waterproof raw tape when installing the sensing ring to avoid poor electrical connection.
5. Do not change the tin welding of the induction coil to copper welding or silver welding.
6. During induction heating of materials with poor magnetic conductivity, such as copper and aluminum, the number of induction coils should increase.
7. The coupling gap between the induction coil and the heating part should be 1-3 mm (with a small heating area).
8. Operators should keep records of daily maintenance of equipment.
9. It is recommended to use a thickness of 1-1.5mm φ 5 or more round copper tubes or square copper tubes are wound with induction coils.
10. Equipment should be protected from sunlight, rain, moisture, etc
For attention matters of the automatic high frequency welding machine, please contact us freely any time.
