Welding machine assistive devices include gas welding glasses that prevent the operator from being welded by welding arcs or other welded energy sources that damage the eyes, the mask that protects the welder's eyes, face and neck during arc welding, white overalls, welder gloves and foot protectors, etc.
Energy-Efficient:
The energy saving of welding machine is embodied in two aspects of energy saving and load when it is empty. When the electric welding machine can put the main circuit, fan and so on into the stop state, the no-load power consumption is only a few watts, the efficiency of the welding machine load is higher than that of the thyristor rectifier welder. According to the relevant parameters statistics, 2008 National Welding Industry DC Welding Machine demand of 890,000 units, if all the use of welding machine, can directly save 43,000 tons of copper, steel 64,000 tons, save electricity 680 million KW.H, indirect savings of 566,500 tons of coal, water 10.34 million tons, reduce CO2 emissions 1.1445 million tons.
Thus, the vigorous promotion of welding machine has great economic and social benefits.
Stable performance:
Because the working frequency of the welding machine is more than 20KHZ, it has a fast response speed, and the droplet transition subdivision can be controlled into multiple stages. For CO2 gas protection welding, the splash can be greatly reduced, the pulse melting pole mig/mag welding can effectively control the stability of the jet transition, but also the droplet transition and the movement of the wire feeding mechanism can be combined to further control the droplet transition process, get good weld forming, welding performance is stable.
These are the traditional rectifier welding machine can not do.
Centralized control:
Welding Machine A large number of single-chip microcomputer, DSP, FPGA and other digital controllers, through Ethernet, Fieldbus to achieve a number of welding machine or the host computer and welding machine between the network communication. It not only solves the problem of cooperative operation of multiple welding machines, facilitates the centralized control in the welding process, but also realizes the setting or monitoring of the parameters of the remote welding machine, which makes the remote fault diagnosis and maintenance of the welding machine possible.





