+86-18630226696

Latest Products

  • Medium Frequency Seam Annealer
  • Welder Plant Machine
  • High Frequency Welder Plant
  • Solid State HF Weld Machine
  • High Frequency Welding Plant
  • Solid State-High Frequency Weld Machine

Contact Us

    China

    CHINA

    ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China

    TEL: +86-312-2090169/2090165

    FAX: +86-312-2090165

    Email: sales02@metowd.com

    Iran

    IRAN

    ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran

    Postal Code: 1834175977

    Tel: 00982156231607-8

    Mob: 00989121350509

    Email: atiravesh@yahoo.com

    Anahita-GmbH

    Germany Design & Development Office

    Germany Design & Development Office

    ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany

    Tel: 0049 521 9890 170

    Mob: 0049 163 5149 622

    Email: amir.malek@anahita-gmbh.de
    s.malek@anahita-gmbh.de

High Efficiency Switch Welding Machine video

High Efficiency Switch Welding Machine

Product Name: ERW pipe welding machine The ERW pipe welding machine (all-in-one machine) is designed for straight seam induction (contact) welding of steel tubes. It mainly uses IRFP460 (MOSFET) and DSEI60-06A (fast recovery diode), rectifier diodes, and modular Power component consisting of...

Description

Product Description

Product Name: High Efficiency Switch Welding Machine开关焊机

The High Efficiency Switch Welding Machine is designed for straight seam induction (contact) welding of steel tubes. It mainly uses IRFP460 (MOSFET) and DSEI60-06A (fast recovery diode), rectifier diodes, and modular Power component consisting of high-power IGBT and other power devices. The high-power capacitor bank C and the inductance coil L form the current-mode parallel boost resonant circuit. This kind of circuit adapts to the high-frequency welded pipe with low load impedance and does not require the output transformer. This not only improves the efficiency but also increases the reliability of the whole machine.



Modular power module consisting of high-power IGBT and other power devices

The IGBT module used in the automatic pipe welding machine (all-in-one machine) combines the advantages of the high input impedance of the MOSFET and the low conducting voltage drop of the GTR, so that it can directly convert the rectified direct current of the ordinary three-phase 380V AC power into controllable alternating current. It overcomes the shortcomings of low voltage regulation efficiency and low power factor in traditional solid-state high-frequency welder isolation transformer and thyristor .


Compare to the traditional solid state high frequency welding machine, the High Efficiency Switch Welding Machine (all-in-one machine) has the advantages as following:


High Efficiency

Comparing to traditional solid state welder, save power for 15%-25%.

The three-phase AC power supply converts AC into DC through full bridge rectifier circuit, and a number of matched filter networks are set on the line, which makes the harmonic component of high-efficiency switching welding machine (all-in-one machine) very little during operation. The power factor is above 0.96.

Less Area Covered

Easy installation

When installing the equipment, it is only necessary to connect the three-phase power supply and the main circuit cable of high-efficiency switch welding machine (all-in-one machine). There are less than ten connections between three-phase power supply and high-efficiency switch welding machine (all-in-one machine). High efficiency switch welding machine (all-in-one machine) and the connection between the console is also very few. With the good cooperation of users, the installation of the whole power supply can be completed in two days.

Easy Maintaince

In the past, high-frequency welding machines often appear device damage and protection at the same time. The new generation of high efficiency switch welding machine (all-in-one machine) adopts the design concept of prevention. Under the premise of ensuring the performance, the circuit structure is simplified, the design parameters are carefully selected, the good process layout is ensured, and the stability and reliability of the power supply are ensured. At the same time, the relatively perfect fault alarm and display system are set up, so that the maintenance personnel can quickly find out the cause and location of the fault in case of system failure. The new generation of high efficiency switch welding machine (all-in-one machine) has the following protection measures

Less installation cost

Welding Quality

Benefitted from PWM precise control voltage and three level of filtering, the voltage output is stable, ripple coefficient is 50% lower than solid state welder. The welding quality is obviously better than traditional solid state welder.

 


Detail Picture

开关焊机

开关焊机中控

2

Packing and Delivery

The ERW pipe welding machine always packed by strong export standard wooden case, protected the machine perfectly.

package-1

Company view

1111

Exhibition

exihibiton

Contact Us

name card

Hot Tags: high efficiency switch welding machine, China, manufacturers, suppliers, factory, customized, wholesale, buy, made in China, energy-efficient welding machine, welding machine for hybrid control technology, welding machine for nfc control technology, welding machine with shockproof function, welding machine with anti stick function, welding machine for plate metal

Send Inquiry

(0/10)

clearall