Contact Us
CHINA
ADD: ChaoYangNan Str, 300m to BaoCang Express Way Exit, BaoDing, HeBei, China
TEL: +86-312-2090169/2090165
FAX: +86-312-2090165
Email: sales02@metowd.com
IRAN
ADD: No.3 - Golshid9 St. - Nakhlestan Blvd. - Shams abad industrial Zone -40km Tehran Qom Freeway - Tehran - Iran
Postal Code: 1834175977
Tel: 00982156231607-8
Mob: 00989121350509
Email: atiravesh@yahoo.com
Germany Design & Development Office
Germany Design & Development Office
ADD: Wellensiek 111, 33619 Bielefeld Deutschland, Germany
Tel: 0049 521 9890 170
Mob: 0049 163 5149 622
ERW Steel Pipe Mill
Product Name: ERW Steel Pipe Mill ERW Steel Pipe Mill is used to produce steel pipes of 48mm to 127mm in OD and 1.5-5mm in thickness, as well as corresponding square and rectangle pipe. Application: GI, construction, automotive , general mechanical tubing, furniture,chemistry, conduit, nuclear...
Description
Product Name: ERW Steel Pipe Mill
ERW Steel Pipe Mill is used to produce steel pipes of 48mm to 127mm in OD and 1.5-5mm in thickness, as well as corresponding square and rectangle pipe.
Application: GI, construction, automotive , general mechanical tubing, furniture,chemistry, conduit, nuclear etc.
Advantages:
High Production Efficiency, line speed can up 70m/min.
High Automation
High Strenght, the ERW Steel pipe mill works stably at a high speed, which improves the product quality.
High Good production rate, can reach to 96.6%
Can be customized
Specification:

Common treatment methods for weld cracking in weld quality control
Here we only discusses the common carbon steel pipe with diameter less than or equal to 60mm. In the actual welding process of welded pipe, weld cracking is a common welding defect in welding quality problems. The common method is to expand the welded pipe after welding, and the weld directly cracks during the experiment, as shown in the figure below:

How to deal with this kind of quality problem, we first need to observe the following contents to judge the direction of the problem
1. Whether the width of heat affected zone along both sides of weld centerline on pipe surface is symmetrical;
If the width of the heat affected zone along both sides of the weld centerline is inconsistent, it indicates that there is a problem in extrusion forming.
2. Whether the internal and external weld overlap (Burr) of the weld is consistent;
If the weld inside and outside the amount of overlap (Burr) is not consistent, that extrusion molding problems.
3. Whether the neutral line of the weld cross section along the weld position is symmetrical;
If the cross section of the weld is asymmetric along the neutral line of the weld position, it indicates that there is a problem in extrusion forming.
4. After deburring, the color of the weld is heated;
If there is no black luster, only light color, or the heating zone is very narrow, other molding problems can not be seen, most of them are the insufficient heat absorption of the steel strip at the weld.
Generally, the following measures can be taken to deal with the above situations:
1. Adjust the extrusion molding of the extrusion rod
According to the observed quality of the finished product (1, 2, 3 as described above), adjust the matching condition of the extrusion rod and the extrusion amount.
2. Adjust the heating time of heating zone
When to replace the heating coil or adjust the position of coil and extrusion center to ensure enough heating time.
Our Service:


Why Choose Us:


Hot Tags: erw steel pipe mill, China, manufacturers, suppliers, factory, customized, wholesale, buy, made in China, SS pipe making machine, Carbon Steel Pipe Production Line, Steel Pipe Mill Line, Diameter 76 Pipe Making Machine, API Tube Mill, Metal Tube Making Line
You Might Also Like














